Operational reporting system

Operational reporting - wikipedia

operational reporting system

Business Intelligence vs Operational Reporting vs Financial

Some estimate that 90 of signals on the air are "bad" in that they were never adjusted for optimum settings of level, deviation, preemphasis, tone skew, deemphasis, balance, and impedance, etc. Fix it (usually at the transmitter) if you want to be seen. Aprs operations Tip: There are several different ways to optimize your aprs mobile operations depending on the immediate situation. One way to rapidly select between them without having to go through menu's is to simply program several radio channels with the different settings. The beauty of these channel suggestions is that you can always leave the speaker volume turned up on the aprs data band and can move between full audio monitoring,. Voice Alert, or to complete silence simply by changing channels.

Difference between Operational vs Analytical Reporting

Aprstt Satellite, qikcom-2, presented in Utah, aug 2015. Powerpoint (8 Mb) (Feb 2015. desk version). Dayton 2015 Talk, this page evolves over time. New stuff is posted here at the top. Older stuff migrates downward. To see the full description of aprs you have to drill downward pretty far. But it is there back to the beginning (1992). Is it your radio? Since packet begain in 1978 too many people use it as a plug-N-play mode where you just connect your tnc to the radio and begin operating. Sure, it probably "works" on some strong signals, but could be suffering 10 to 40 dB of performance loss on weaker plagiarism signals you might never notice (you dont see what you dont see). Here is the best explanation, i have seen by john Ackermann, N8UR.

So far we have the. Empire builder, chicago to lab washington, aprs is now in its 25st year! Aprs is digital communications information channel for Ham radio. As a single national channel (see map at right it gives the mobile ham a place to monitor for 10 to 30 minutes in any area, at any time to capture what is happening in ham radio in the surrounding area. Announcements, bulletins, messages, Alerts, weather, and of course a map of all this activity including objects, frequencies, satellites, nets, meetings, hamfests, etc. The aprs network has grown to most countries with strong Amateur Radio populations. Aprs/Energy talk at Superfest in peoria, ill sept 2015.

operational reporting system

Operational Reporting (Overview with tools, software, best practices

Once these analog data points are mapped and being loaded automatically, these analog points are then identified as devices in ucentra and all the associated data can be viewed just as any other meter device data can be viewed in the ucentra portal. Gis/Engineering Analysis Interface includes loading lat/lon coordinate data for each device into ucentra along with substation, circuit, phase, line section and transformer where the device is served. Data visualization is useful for viewing report results rendered onto maps. G t (Generation and Transmission) / ja (Joint Action Agency) - the g t/jaa module Interface imports wholesale delivery point meter data, in register and interval form, into ucentra. With this interface in place, the utility can search, graph, and view their wholesale delivery data just like any other endpoint managed in ucentra. This data is used by the ucentra line loss Analysis and Reporting Module or when a utility wishes to view meter data used to produce their wholesale energy bill on a monthly basis by their jaa or. Work management work Order Data Interface allows the ucentra mdm user to spawn a work order from ucentra when responding to meter events. Amtrak tracking: If you took a trip on amtrak with your aprs radio and made a plot, send.

Best Reporting tools 2018 reviews of the most Popular Systems

operational reporting system

Operational Reporting - ucas

Traditionally ami deployments have been utility wide deployments, however Hybrid networks are more commonplace today. If a utility has a diverse topography, rf may be a good solution for part of the service territory and immigration plc may be requirement for other parts of the service territory. Utilities will have existing amr/ami systems that they will either replace or supplement. Deployments can span several years and when optional additional ami interfaces are added initially, all data can be accessed in ucentra. In some cases utilities may have an existing amr/ami system and would like to pilot or only have a segment of their customers using an ami solution. Use of different Technologies to fulfill varying requirements of Commercial and Industrial Customers. Cis (Customer Information Systems) - integration to the meter master, customer master, billing history, rates, cycles and location/premise data at a minimum; Billing data exchange integration utilizing from-host and to-host flat file exchange at a minimum; Billing process review, evaluation and recommendation based on using.

Over 20 different cis vendor interfaces available and additional interfaces can be configured if required and is included in the scope of most implementations. Prepay regular update of billing determinates to support Prepay billing oms (Outage management System) - the oms interface brings in data from the Utility 3rd party outage management Systems into the mdm/odm, to allow viewing of outage history that include verified outages and verified outage. The oms interface also provides confirmed outage information to vee functions to avoid creating estimated data to fill gaps in interval data stream where confirmed outages were recorded. An additional use of the interface is to support the brokering of outage events from the ami system to the oms system if the oms and ami systems do not support interfacing to each other. Scada historian The scada interface enables access to scada historian analog data, trended in 5, 15, 30, or 60 minute intervals, inside ucentra and allows mdm users to combine this data with other device oriented data residing in ucentra. With the scada interface, the utility can map analog point names residing in the scada historian, to be processed into ucentra daily or hourly or as often as every 5 minutes, into ucentra.

System tools - provides virtual metering and load profiling functionality. Importer/Exporter, this interface enables file based importing and exporting of data to and from the ucentra data repository. This functionality supports exporting data into utilitys cis and other downstream data processing systems as well as loading data into the mdm from data collection systems such as ami, scada, ieds, g t data postings, third party data collectors, etc. Weather - importing and storing weather data provided by a third party weather data source is supported. Weather is displayed in the various charts/graphs when users view data in the mdm. Data views - a set of pre-defined, pre-built data views are provided with the mdm data repository.


These data views look very similar to actual database tables and allow utility users to connect to the database and create their own ad hoc queries. Since the mdm data warehouse model includes a broad range of tables, procedures and functions, these data views are included to reduce the complexity for utility users to access the data for other functions. Users can connect to these views by odbc connection using ms access, Crystal Reports or other desktop query and reporting tools. Ucentra, operational Data management, a unified Utility data Interface, to get full value out of Utility data, a full 360 view of the data is required. This means that any resource in a utility has access to utility application data including Customer Data, ami, outage, scada history, etc. Interface modules or adapters are available for a number of 3 rd party back-office systems: ami (Automated Metering Infrastructure) - this ucentra interface supports ami provisioning, ami data collection, ami event handling, and interactive ami command and control including disconnect/re-connect, on-demand meter reading. While the interface supports single ami configurations, multiple ami interfaces can be configured into a single ucentra installation allowing data from multiple disparate ami vendors to be integrated and managed in a single ucentra system.

Operational Reporting vs Business Intelligence - polaris Associates)

Vee, validation Editing and Estimation - process interval data and apply precise validation, Editing and Estimation standards to fill in gaps and missing reads and resolve other data anomalies. Dashboards - simple access to data by internal utility users for individual or departmental analysis. Park operational dillard data on a desktop for internal monitoring of operational statistics and business performance metrics. Messaging and Alerting - receive predefined alerts as they occur via email and/or text messaging. Receive notifications of high or low voltages and system status. Schedule loyalty reports to be sent via email. Scheduler, allows scheduling of predefined events, such as amr data processing, scada data processing and billing determinant generation for cycle billing reads, etc.

operational reporting system

Portal - a consolidated view of customer account information, outage data, meter event history, connect/disconnect history and ami control. In one click, answer customer questions without toggling through multiple screens or relying on Dispatch for outage information and the metering Department for meter information. Advanced Charting and Graphing - help customers resolve usage issues and understand their usage patterns. Engineers can analyze operational data on the fly for different system configurations. Generate graphs of information to be viewed by specified date range and billing cycle. Graphs can be generated writers for billing history usage, virtual meters, interval readings and scada historian load profile data presentation. Advanced graphing capabilities including the ability to aggregate meter usage (virtual meter).

manages workforce safety and health, process safety, reliability and integrity, environment, efficiency, security, and stakeholders in order to meet our oe objectives. ElectSolves flagship product, ucentra, is a proven, vendor-neutral, next generation data management and integration platform for managing and integrating; ami, amr, scada, cis, oms, ea/gis, cvr, demand Response, distribution Line management Systems and other utility operational systems. With interfaces to over 50 of the most common 3rd party vendor solutions used by utilities, ucentra is your best choice for operational data integration, consolidation and management. Ucentra provides a full 360-degree view of all operational data with centralized management, analysis and reporting. ElectSolves ucentra platform includes the following; Meter Data management, operational Data management a unified Utility data Interface. Utility data Analytics, utility system Interoperability and Integration Framework ucentra meter Data management, a basic configuration of ucentra integrates utility ami and cis data. With this configuration a utility fulfills a meter-to-cash function with basic Meter Data management (MDM) functionality as well as giving utility staff a comprehensive way of serving the utility customer with more information with insight into their usage patterns. Functionality includes: csr (Customer Service representative).

An edh is a broker of data. An ods is certainly not. An operational data store (or ods is a database designed to integrate data from multiple sources for additional operations on the data, for reporting, controls and operational decision support. Unlike a production master data store, the data is not passed back to operational systems. It may be passed for further operations and to the data warehouse for reporting. Because the data originate from multiple sources, the integration often involves cleaning, resolving redundancy and checking against business rules for integrity. An ods is usually designed to contain low-level or atomic (indivisible) data (such as transactions and prices) with limited history that is captured "real time" or "near real time" as opposed to the much greater volumes of data stored in the data warehouse generally. Contents, general use edit, the general purpose of an ods is to integrate data from disparate source systems in a single structure, using data integration technologies like data virtualization, data federation, or extract, transform, and load (ETL). This will allow operational access to the data for operational reporting, master data or reference data management.

Economics for the ib diploma paper 3 Workbook: paul hoang

From wikipedia, the free encyclopedia, jump to navigation, jump to search. An operational data store is used for operational reporting and as a source of data for the Enterprise data warehouse (EDW). It is a complementary element to an edw in a decision support landscape, and is used for operational reporting, controls and decision making, as opposed to the edw, which is used for tactical and strategic decision support. An operational data store should not be confused with an enterprise writing data hub (EDH). An operational data store will take transactional data from one or more production system and loosely integrate it, in some respects it is still subject oriented, integrated and time variant, but without the volatility constraints. This integration is mainly achieved through the use of edw structures and content. An ods is not an intrinsic part of an Enterprise data hub solution, although an edh may be used to subsume some of the processing performed by an ods and the Enterprise data warehouse.


operational reporting system
All products 40 articles
All data in ppirs is classified as source selection Sensitive and is not releasable unless directed. Aprs was developed by bob Bruninga, wb4apr, as a real-time local tactical communications system for rapidly exchanging digital data of immediate value to operations. This really took off when gps became available and maps were integrated into the system for tactical situational awareness of everything in the net.

5 Comment

  1. Paper presented at, project Management Institute, annual Seminars symposium, nashville,. Providing Information for Best Value awards! Welcome to the past Performance. Information Retrieval System (ppirs).

  2. Find out how Chevron achieves. Operational Excellence (oe and how it drives everything. Operational readiness is your system more ready than your environment?

  3. An operational data store is used for operational reporting and as a source of data for the Enterprise data warehouse (EDW). It is a complementary element to an edw in a decision support landscape, and is used for operational reporting, controls and decision making, as opposed to the edw, which is used for tactical and strategic decision. The national Defense authorization Act for Fiscal year 1999 (ndaa 1999) added Section 117 to United States Code title 10, which directed the secretary of Defense to establish a comprehensive readiness reporting system that would measure in an objective, accurate, and timely manner the capability. Military to carry out the.

Leave a reply

Your e-mail address will not be published.


*